How to install a Brother TN-760 Toner Cartridge?

how to install a TN-760 toner cartridge

Brother TN-760 is the most cost-effective toner cartridge in black-and-white printer, and can provide high-quality printing effect for families and offices.

Brother TN-760 toner cartridges can be applied to three different types of printers, which is HL, DCP and MFC. These three types of printers vary in size and scope of application. HL series printer can only print and is usually suitable for home use; DCP and MFC series printers are all-in-one machines with multiple functions, which can meet your various requirements and meet the needs from families to small and medium-sized offices. You can also jump directly to know more about these three types of Brother printer series: Brother HL vs. DCP vs. MFC.


Cartridge Specifications

Brother TN-760 is a high-capacity version of the Brother TN-730 (prints: 1,200 pages) standard yield toner cartridge. It can print 3000 pages, 1800 pages more than the standard one. The two toner cartridges have the same size, are suitable for the same printer models, and the installation method is the same. The only difference between them is the toner content in the cartridges. If you don’t want to replace it too frequently or you have a large printing volume, the TN-760 high yield toner cartridge is a cost-effective choice.

It is worth noting that, whether you use TN-730 standard yield or TN-760 high yield toner cartridge, you need to use it together with DR-730 drum unit. DR-730 just a shelf and does not contain toner, but it can print 12,000 pages, which means you can use it with new Brother TN-760 toner up to 4 times.Brother TN-760 needs to use with Brother DR-730


How to install a Brother TN-760 toner in your Brother printer?

This installation guide suitable for the following printer models:

HL-L2350DW, HL-L2390DW, HL-L2395DW, HL-L2370DW, HL-L2370DWXL;

MFC-L2710DW, MFC-L2730DW, MFC-L2750DW;

MFC-L2750DW XL, DCP-L2550DW Printers.

If the above video cannot be viewed, here are the installation steps again for reference. These steps are the same for TN-730 (standard yield version) and TN-760 (high yield version) cartridges!

Step 1 – Open the front cover of the machine.

Step 2 – Remove the drum unit and toner cartridge assembly from the machine.

(Please note that you can’t put the TN760 toner cartridge directly into the printer.)

Step 3 – Push down the green lock lever and take the toner cartridge out of the drum unit.

Step 4 – Take out the new toner cartridge replacement, hold the cartridge level with both hands and gently shake it from side to side several times to evenly distribute the toner in the toner cartridge.

Step 5 – Remove all the protective cover and tape.

Step 6 – Put the new toner cartridge into the drum unit until you hear it lock into place. If you put it in properly, the green lock lever will life automatically.

Step 7 – Slide the green tab from left to right and from right to left to clean the corona wire of the drum unit. Remember slide the green tab to the home position after finish the clean.

Step 8 – Put the toner cartridge and drum unit assembly into the machine and close the front cover.


How often is the TN-760 cartridge replaced?

It depends. Generally speaking, users of ordinary demand need to replace the TN-760 toner cartridge every 3-4 months. Users with large print volume will need to replace more frequently.


How to save on Brother TN-760 / TN-730 Toner?

If you are looking for a cheap alternative to the original toner cartridge, please consider v4ink compatible TN-760 toner cartridges, which can save you up to 80% and provide you with the same printing page of the original one. All items are auto-produced strictly under ISO 9001 and ISO 14001 STMC standard, with over 1.40 black uniform density, firm fixation, sharp printout, which are totally comparable to the originals.


How to extend the life of TN-760 toner?

The use of printer cartridges is indeed a huge cost for users. Long term use is even more expensive than buying a new printer. The smartest way is not only to buy a compatible toner cartridge, but also to extend the service life of the toner cartridge, which can save you a lot. Learning the following operations can make you use your toner cartridge more fully. Let’s go on:

Shake the Toner Cartridge Side to Side

Brother TN-760 uses powdered toner. Over time, the powdered toner in the cartridge will agglomerate and unevenly distributed, resulting in toner waste. To extend the life of the toner cartridge, you need to remove the toner cartridge from the printer regularly, shake it to redistribute the toner, and then reinstall it.

Turn on Toner Saving Mode

To do this go to your Brother print settings, Depending on the laser printer model you can, change print mode to: Draft mode, Fast mode or Toner-saver mode, all use less ink by reducing the DPI (dots per inch). Utilize one of these modes when content matters more than print quality; they’re often perfectly acceptable for working with intra-office documents.

Purchase high yield toner cartridges

Compared with the standard cartridge, the high print volume cartridge contains more toner and can print more pages. They use a large toner bin and double the amount of printing. In addition, the cost per page of high yield cartridge is less than the standard yield. In other words, high yield cartridge will save you more money.

Storage of the toner cartridges

Temperature and humidity have an impact on the service life of the toner cartridge. If the temperature is too high or too low, it will affect the service life of the cartridge. If the storage space is too wet, it will also make the powdered toner agglomerate. Place the toner cartridge upright in a cool and dry indoor place. Seal the cartridges in their original packaging until you need to use them can help to extend their lifespan.

We hope you find this guide useful! If you have any questions about the Brother TN-760 toner cartridge, please leave us a message by email: support_team@v4ink.com. Good luck!

Article Source: https://www.v4ink.com/How-to-install-a-Brother-TN-760-Toner-Cartridge

How to eliminate the common problems of Brother HL-L2350DW printers?

How to eliminate the common problems of Brother HL-L2350DW printers

Brother printers have a special structure, which is the toner cartridge and drum unit seperation structure. Brother HL-L2350DW is one of the models of this structure. Therefore, the most common problem about this type of printer is relatively complex. The cause of the problem may be due to the toner cartridge or the drum unit. This article allows you to better understand this type of printer and make it easier for you to deal with the following problems.


“Replace Toner”

Brother HL-L2350DW use with Brother TN-730 standard yield (1200 pages) toner cartridge or Brother TN-760 high yield (3000 pages) toner cartridge. A toner cartridge can usually be used for 3-4 months, depending on how much you print.

When the “Toner” button Lights up and the “Replace Toner” display on the LCD of the printer, it means the toner cartridge is at the end of its life and you need to replace the toner cartridge with a new one.

How to Replace Brother TN-760 or TN-730 toner cartridge with a new one?

The following replacement video applies to all printers models which use with Brother TN-760/TN-730.

Step 1 – Open the front cover of the machine.

Step 2 – Remove the drum unit and toner cartridge assembly from the machine.

(Please note that you can’t put the toner cartridge directly into the printer.)

Step 3 – Push down the green lock lever and take the toner cartridge out of the drum unit.

Step 4 – Take out the new toner cartridge replacement, hold the cartridge level with both hands and gently shake it from side to side several times to evenly distribute the toner in the toner cartridge.

Step 5 – Remove all the protective cover and tape.

Step 6 – Put the new toner cartridge into the drum unit until you hear it lock into place. If you put it in properly, the green lock lever will life automatically.

Step 7 – Slide the green tab from left to right and from right to left to clean the corona wire of the drum unit. Remember slide the green tab to the home position after finish the clean.

Step 8 – Put the toner cartridge and drum unit assembly into the machine and close the front cover.

After replacing the new toner cartridge, your printer may also appear the error prompt of “Toner Low”. You may suspect that there is a problem with your toner cartridge, but it is not. There may be an error in the built-in counter of the printer, which records the service life of the previous toner cartridge. At this time, you need to reset the toner cartridge manually.

How to Reset the Brother toner service life of the Brother HL-L2350DW?

This guide also suitable for Brother HL-L2390DW, HL-L2395DW, HL-L2370DW, MFC-L2710DW, MFC-L2730DW, MFC-L2750DW, HL-L2370DWXL, MFC-L2750DW XL and DCP-L2550DW Printers.

Step 1 – Open the front cover of the printer.

reset tn-760 toner cartridge step 1

Step 2 – Press the “Go” and “Back” buttons at the same time and hold for 1 to 2 second.

reset tn-760 toner cartridge step 2

Step 3 – Released 2 buttons and press the “Back” button again at once. The printer will go to the reset page.

Step 4 – The printer screen will display “TNR-STR”. Press the “down” arrow to display “TNR-STD” and press it again to display “TNR-HC”.

TNR-STR stands for “toner starter cartridge”, which is the cartridge that comes with your new printer

TNR-STD stands for “toner standard cartridge”, which is the TN-730 cartridge.

TNR-HC stands for “toner high capacity”, which is the TN-760 cartridge.

reset tn-760 toner cartridge step 4

(Make sure you select the appropriate cartridge version, depending on what cartridge you’ve installed. )

Step 5 – To make your selection, press “OK” button to confirm. Then the printer will display “Reset /Exit”.

reset tn-760 toner cartridge step 5

Step 6 – Press the “down” arrow to confirm to reset the toner counter, the printer will display “Accepted”.

reset tn-760 toner cartridge step 6

Step 7 – Close the front cover to finish the reset process.


“Replace Drum”

Drum unit is a separate component of the Brother printer, which needs to be used with toner cartridges. For example, the DR-730 drum unit needs to be used with TN-760 toner cartridge, and the DR420 drum unit needs to be used with TN450 toner cartridge. Drum unit typically requires replacement after the use of 3 or 4 toner cartridges, because the drum units have higher page yields.

When the “Drum” LED is Lights up and the error message “Replace Drum” displays on the LCD of the printer, it means the drum unit has been run out and it’s time to replace the drum unit.

How to Replace Brother DR-730 drum unit with a new one?

Step 1 – Make sure the printer is on and open the front cover of the printer.

replace dr-730 drum unit step 1

Step 2 – Remove the toner cartridge and drum unit assembly from the printer.

replace dr-730 drum unit step 2

Step 3 – Push down the green lock lever and take the toner cartridge out of the drum unit.

replace dr-730 drum unit step 3

Step 4 – Unpack the new drum unit.

Step 5 – Push the toner cartridge firmly into the new drum unit until you hear it lock into place.

replace dr-730 drum unit step 5

Step 6 – Install the toner cartridge and drum unit assembly back into the machine.

replace dr-730 drum unit step 6

Step 7 – Close the front cover of the printer.

When you replace the drum unit with a new one, but the “Replace Drum”, “Drum End Soon” or “Drum Stop” message still display on your printer, you may need to reset the drum counter:

How to Reset the drum counter of the Brother HL-L2350DW?

Tips: DO NOT reset the drum counter unless you are replacing the drum unit.

Step 1 – Make sure the machine is turned on.

Step 2 – Make sure the machine’s front cover is closed.

Step 3 – Press “OK” button and “up” arrow at the same time.

reset dr-730 drum unit step 3

Step 4 – Press “OK” button to select [Drum]. 

reset dr-730 drum unit step 4

Step 5 – Then the printer will display “Reset /Exit”. Press “down” to reset the drum counter.

reset dr-730 drum unit step 5

Step 6 – the printer will display “Accepted” and finish the reset process.

reset dr-730 drum unit step 6

If you encounter other problems not mentioned in this article, please contact us with our email: support_team@v4ink.com, if you want to experience our products for free, please click here for details. V4ink compatible Ink and toner cartridges are designed to provide you with the most affordable alternatives to the original products, so that you can get the same printing effect as the original products at the least cost.

Article Source: https://www.v4ink.com/How-to-eliminate-the-common-problems-of-Brother-HL-L2350DW

Does the cartridge of Brother HL-L2350DW need to replace the chip?

Brother TN-760 Toner Cartridge come with chip or without chip?

Many people use Brother printers. Do you know whether the toner cartridge of your printer come with chip?

Many people don’t pay attention to whether the toner cartridge contains chips. Some of them don’t realize that their toner cartridge needs chips until their printer can’t recognize the new toner cartridge. Did you know that the toner cartridge of Brother HL-L2350DW printer needs a chip?


What’s the toner chip?

Brother TN-760 Toner Chip

Have you noticed that you receive a warning every time you run out of toner or ink? Now many printer cartridges come with smart chips. A smart chip is like a small circuit board, which located at a specific position of the toner cartridge and is consistent with the position of the identification chip in the printer.


What is the toner chip used for?

1. They contain cartridge specific information, such as model and print volume. (therefore, the printer can recognize that the correct cartridge is installed).

2. They are mainly used to store information, including recording your print usage and ensuring the capacity of toner.


How does the toner chip work?

The toner chip is used to monitor and count the amount of the droplets during printing. Chips are programmed for specific toner designs and once a certain number of droplets are used, the chip will provide a warning and stop printing.


Does the Brother HLL2350DW printer cartridge come with chip?

The answer is yes! The Brother toner TN-760 which compatible for HL-L2350dw printer come with chip. In addition, it is compatible with the following brother printers: HL-L2370DW, HL-L2370DW XL, HL-L2350DW, HL-L2390DW, HL-L2395DW, MFC-L2750DW, MFC-L2750DW XL, MFC-L2710DW, MFC-L2730DW, DCP-L2550DW.

But some times, Brother TN-760 did not come with chip. For example, v4ink launched the no chip version of TN-760 toner as early as 2018.

What does the no chip mean? No chip means that you need to replace the chips from the original OEM (genuine) Brother TN-760 toner cartridges to the new compatible toner cartridges.

During the production of TN-760, some compatible manufacturers found that the chips removed from the original toner cartridge can be used normally when placed on the new compatible toner cartridge. This kind of no chip toner cartridge version of the product reduces the cost of chip research and development, the price is much lower than the original, and is more loved by consumers.

The only disadvantage of this no chip cartridge is that the chip needs to be removed from the original equipment and installed into the new cartridge.

How to replace the chip of Brother TN-760 high yield toner cartridge?

You can also follow the steps listed below:

Step 1 – Turn the printer off first

Step 2 – Open the printer cover and take off the old toner with the drum together;

Step 3 – Take out the toner cartridge from the drum unit;

Step 4 – Take off the chip from the OEM toner cartridge with screw-driver;

Step 5 – Install the chip into the new toner cartridge;


Does the chip need to be reset after replacement?

You may need to reset the toner chip depending on your printer model. Some toner chips can be used normally without reset after replacement, but some printers may record the old data of the chip and promote the error message, such as “toner cartridge is empty” or “toner low” resulting in failure to use normally or recording the amount of the droplets normally.


How can I make my printer recognize my new toner cartridge?

If your toner cartridge is not recognized by the printer after reinstallation, please calm down. The following methods may help you:

Step 1 – When you remove the old cartridge, allow roughly 10 minutes before installing the new one.

Step 2 – Try replacing the old cartridge with the new one and see if the printer will recognize the cartridge.

Step 3 – If that doesn’t work, remove the new cartridge and place it in a safe place and surface so there won’t be further damage.

Step 4 – Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes.

Step 5 – Plug it back in and re-insert the cartridge.

Step 6 – Turn the power back on and this should work and your new cartridge should work!

If that didn’t work, you can try the following steps:

Clean the smart chip of the toner cartridge – this piece of metal can often times get dirty and would require a cleaning.

Step 1 – Power down and unplug the printer. Carefully remove the cartridge and place it in a safe place. Inspect the cartridge and the inside of the printer for any metal contacts. You should also check the inside of the printer for the connection point.

Step 2 – Softly, with a dry cloth, wipe the contacts on the cartridge and printer in order to remove any dirt or residue that has built up over the years. Replace the cartridge, power back on and try again to print.


The emergence of “new chip” or “second generation chip”

With the emergence of more and more compatible toner cartridges, the status of original toner cartridges has been shaken, and they have to take measures, one of which is to improve their chips or upgrade the firmware of the equipment.

OEM (original equipment manufacturers) upgrades its chips or printer firmware from time to time, so that the old chips cannot run on newer printers. This is why for some ink or toner models, you will see new chip versions or second-generation versions. The main purpose is to let printers only recognize OEM toner cartridges, so as to monopolize the whole market.

With the progress of technology, v4ink has been able to independently develop its own smart chip, which is compatible with original printer and adapt to the latest firmware of the equipment.

All TN-760 toner models currently on sale in v4ink come with chips, which are more convenient and affordable. The cumbersome steps of replacing the chip are abandoned, and the installation method is as simple as the original. It can provide the same printing effect and number of pages as the original product, and the price is only 20% of the original one.

In addition, you can experience our our TN-760 toner (with chip) for free before purchasing. Click here for details.

Article Source: https://www.v4ink.com/Does-the-cartridge-of-Brother-HL-L2350DW-need-to-replace-the-chip